Equus 3120 - OBD 2&1 Tool Kit Manual do Utilizador descarregar pdf (Página 8)

6 OBD2 & 1

About the Tool

ADJUSTMENTS/SETTINGS AND DTC LIBRARY

■ Unit of Measure: Sets the Unit of Measure for the Tool’s display to

USA or metric.

Adjustments and settings can be made only when the Tool is

NOT connected to a vehicle.

To enter the MENU Mode:

1. With the Tool OFF, press and hold

the

UP button, then press and release

the POWER/LINK button.

■ The adjustments and setting MENU

displays.

2. Release the UP button.

DO NOT release the UP button until the adjustments and

settings MENU is visible on the display.

3. Make adjustments and settings as described in the following para-

graphs.

Searching for a DTC Definition Using the DTC Library (applicable

to OBD2 systems only)

1. Use the UP and DOWN but-

tons, as necessary, to highlight DTC

Library in the MENU, then press the

ENTER/LD button.

■ The Enter DTC screen displays. The

screen shows the code “P0000”, with

the “P” flashing.

2. Use the UP and DOWN buttons,

as necessary, to scroll to the desired

DTC type (P=Powertrain, U=Network,

B=Body, C=Chassis), then press the

DTC SCROLL button.

■ The selected character displays “solid”,

and the next character begins flashing.

3. Select the remaining characters in the DTC in the same way, press-

ing the DTC SCROLL button to confirm each character.When

you have selected all the DTC characters, press the ENTER/LD

button to view the DTC definition.

■ If you entered a “Generic” DTC

(DTCs that start with “P0”, “P2” and

some “P3”):

- The selected DTC and DTC defi-

nition (if available), show on the

Scan Tool’s LCD display.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 87 88

Comentários a estes Manuais

Sem comentários

Equus 3120 - OBD 2&1 Tool Kit Manual do Utilizador Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Equus 3120 - OBD 2&1 Tool Kit