Equus 3130 - Scan Tool – OBD2 Manual do Utilizador descarregar pdf (Página 9)

About the Scan Tool

ADJUSTMENTS AND SETTINGS

OBD2 7

ADJUSTMENTS AND SETTINGS

The OBD2 Scan Tool lets you make several adjustments and settings

to configure the Scan Tool for your particular needs. The following

adjustments and settings are available:

■ DTC Library - Library of OBD2 DTC definitions.

■ Adjust Brightness: Adjusts the brightness of the display screen.

■ Display Backlight: Turns the display backlight on and off.

■ Select Language: Sets the display language for the Scan Tool to

English, French or Spanish.

■ Unit of Measure: Sets the Unit of Measure for the Scan Tool’s dis-

play to USA or metric.

Adjustments and settings can be made only when the Scan

Tool is NOT connected to a vehicle.

To enter the MENU Mode:

1. With the Scan Tool “off”, press and hold

the UP button, then press and

release the POWER/LINK button.

■ The adjustments and setting MENU

displays.

2. Release the UP button.

DO NOT release the UP button until the adjustments and

settings MENU is visible on the display.

3. Make adjustments and settings as described in the following para-

graphs.

Searching for a DTC Definition Using the DTC Library

1. Use the UP and DOWN but-

tons, as necessary, to highlight DTC

Library in the MENU, then press the

ENTER/LD button.

■ The Enter DTC screen displays. The

screen shows the code “P0000”, with

the “P” flashing.

2. Use the UP and DOWN buttons,

as necessary, to scroll to the desired

DTC type (P=Powertrain, U=Network,

B=Body, C=Chassis), then press the

DTC SCROLL button.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

Sem comentários

Equus 3130 - Scan Tool – OBD2 Manual do Utilizador Página 9